To delete all past web activity, you can delete Chrome browsing history in Windows firm. Listed here are the steps you should follow.

Like every other internet browser, Google Chrome browser logs every website you visit and stores it around the history page. This history page is very useful as it allows you to see and access your past web activity and even automatically fill the omnibar while typing the web site URL.

Combined with the upsides, there are also several downsides to having an active log of your web activity. The prime to be the ability for other people, like Google and installed extensions, be able to produce a behavior chart according to your browsing activities. However, the browsing history is so easily accessible that a person with access to your browser can see all your past browsing activity with no difficulty whatsoever. Not to mention, with respect to the browsing history size, under certain circumstances, it can decelerate Chrome significantly. This is especially true when it comes to application launch time, website load time, and general navigation.

Fortunately, google's Chrome browser in Windows gives you the option to pay off the browsing history. All you have to do is choose the timeframe and click on the "Clear" button. I always delete Chrome browsing history from time to time.

In this quick guide, let me guide you through the process of deleting Chrome browsing history in Windows.

Note: The steps shown below works in Windows 7 and Windows 8 too.

Steps to Delete Chrome Browsing History in Windows

To clear Chrome browsing history in Windows, follow the steps shown below.

Open the Chrome in Windows.
Type "chrome://settings" within the URL bar and press Enter.
Select "Privacy and Security".
Click on "Clear browsing data" option.
Select "All time" over time Range.
Select "Browsing history" checkbox.
Uncheck other checkboxes.
Click around the "Clear data" button.
Close the Chrome browser.

Detailed Steps:

1. First, open the Google Chrome browser. You may either search for it in the Start menu or double-click on the desktop shortcut.

2. In the browser, click on the "three vertical dots" icon to the top-right corner from the window. This is known as because the menu icon.

3. Click on the "Settings" option from the menu list.

4. In the Settings page, click on the "Privacy & Secuirty" option around the sidebar.

5. To delete Chrome browsing history, click the "Clear browsing data" option.

6. Now, choose the "All time" option from the Time Range drop-down menu. Choosing this method will clear all the data. Alternatively, you can select whenever range you want in the dropdown menu.

7. Choose the "Browsing history" checkbox. Since we simply wish to pay off the browsing history, uncheck the rest of the checkboxes.

8. Click on the "Clear data" button.

As soon as you click the button, Chrome will delete the entire browsing hisotry so long as you selected "All time" because the Time Range. You can verify that by going to a brief history page. To spread out the history page, type "chrome://history" in the URL bar and press Enter. You should see a blank page.

One want to keep thoughts are that you are only clearing the browsing good reputation for this unique browser. If you are logged into Chrome on some other machine, that browsing history will not be cleared.

Microsoft just announced that Microsoft Edge now supports switching profiles in PWAs. The feature has become readily available for all users, as long as they are running the browser on Windows 10 May 2020 Update or newer.

While you probably have no doubt about if you're a Microsoft Edge user, the browser already allowed easy switching between profiles when loading websites for work and private accounts, however the company has enabled the same functionality in web apps too.

PWAs have become increasingly essential for Windows 10 users, especially as they help deal with the possible lack of apps in the Microsoft Store. Simultaneously, increasingly more information mill adding PWA support for their websites, including search giant Google.

Earlier this year, Google has officially started offering a YouTube web app to users loading the website, and it's believed the organization can also be focusing on adding offline functionality.

Switching profiles in web apps

Microsoft says switching profiles web apps is really as easy as clicking on the profile icon within the title bar of the application that you are running.

"If you install exactly the same site or PWA on several Edge profile, we've introduced a profile switcher around the application title bar to switch between profiles from inside your app. With this experiment, you'll only see one application tile in Windows for that application. Also, once the application starts, it uses the final profile utilized by the applying," the company explains.

"The profile switcher within the title bar only displays if you have exactly the same app placed on more than one profile.

The new feature happens to be readily available for Windows 10 users, but expect Microsoft to include it to another versions of the browser within the coming months too.

When the new update is causing problems, follow the steps shown here to uninstall the Windows 10 October 2020 update (uninstall 20H2 update).

Microsoft has created the brand new October 2020 (20H2) update to all Windows 10 users with compatible devices. As being a feature update, the October 2020 update has been released in a phased manner. This helps Microsoft cope with any unforeseen issues, bugs, and other defects in the update or its rollout process. Among the good things about October 2020 is it is not that big of an update. It is just an incremental update to v2004 with no major changes whatsoever. So for the most part, it shouldn't be that big of an issue to set up the new update.

That being said, when the new 20H2 update causes issues on your system or you don't like it for reasons uknown, you can easily uninstall the 20H2 update. All you need to do is access the advanced settings and uninstall the feature update after that.

Within this quick guide, let me guide you with the steps to uninstall October 2020 update on Windows 10.

Backup before uninstalling

Before uninstalling the feature update, I highly recommend you support all the important files and program settings. Though Windows won't touch your personal file while restoring the previous version, using a good backup of your important and personal files is essential. In the end, it is best safe than sorry.

Steps to uninstall October 2020 (20H2) update

To uninstall October 2020 update, follow the steps given below.

Open the Settings app.
Go to the "Update & Security → Recovery" page.
Click "Get started" under the "Go to the prior form of Windows 10" section.
Select a checkbox and click "Next".
Click the "No, thanks" button.
Click the "Next" button.
Finally, click on the "Go to earlier build" button.

The entire restoration process will take a few minutes with several automatic restarts in between. So, wait till it is completed.

Detailed steps

1. Open the Settings app using the "Windows Key + I" keyboard shortcut. You can also look for it in the Start menu.

2. After opening the Settings app, visit the "Update & Security → Recovery" page. This is where you will find all the options associated with Windows recovery.

3. On the right page, click on the "Get Started" button underneath the "Go back to the prior version of Windows 10" section.

4. Select any of the options and click on the "Next" button. In my case, I select the "Earlier builds seemed more reliable" checkbox.

5. Windows will ask if you wish to check for updates, click the "No, thanks" button to carry on.

6. Click on the "Next" button within this window. It is just warning you to definitely backup files and you might have to reinstall some applications after restoring the previous version.

7. Click on the "Next" button to carry on.

8. Finally, click the "Go back to earlier build" button.

Once you click on the button, Windows will start the prior build restoration process. This can take a while to accomplish and Windows 10 will restart many times in the process. So, relax and wait till it's complete. Once completed, you can log into it as always.

Why shall we be held not seeing the "Go back to the prior form of Windows 10" section?

If you are not seeing this section it implies that you are past the window to restore the prior version. Windows 10 only provides you with Ten days to revive the previous version.

Whether it continues to be a lot more than Ten days or if you've deleted the "Windows.old" folder, you won't be able to return to the previous version. If so, you've got no other choice but to clean install the prior build or restore a backup.

You can scan a person file or folder in Windows 10 with built-in antivirus. Here are the steps to scan a file or folder with Windows Defender.

In Windows 10, Windows Security, previously known as the Windows Defender is your default antivirus and antimalware software. As they are, Windows Security is pretty competent and provides good protection against all sorts of malware, virus, trojan, along with other threats. Along with regular protection, Windows Security also provides real-time protection. This can help Windows Defender, actively monitor your system for just about any threats. If you're careful about how exactly you use the pc, you shouldn't need any additional free or expensive third-party antivirus software.

Though the real-time protection is pretty good, there can be instances when you have to manually scan a file or folder. Should you look at the Windows Security application, you will not find any obvious options to scan only a single file or folder. That being said, it's pretty easy to force Windows Defender to scan personal files or folder.

In this quick and simple article, allow me to demonstrate the steps to scan a file or folder with Windows Security Defender.

Scan file or folder from right-click menu

To scan a file or folder from the right-click menu, stick to the steps listed below.

1. First, find the file or folder you need to scan. The file or folder could be anywhere in your hard disk drive. With my case, the file I want to scan is on my desktop.

2. After you have the file or folder you need to scan, right-click on it. From the right-click menu, choose the "Scan with Microsoft Defender" option.

3. Once you choose the option, Windows Defender will open itself and scan the file or folder.

Depending on the file or folder size, it will take serious amounts of complete. If the file is particularly small, the scan is going to be completed almost instantly.

Once the scan is finished, you will see the scan report right underneath the Scan Options section. Take a look at the look below for reference. With my case, Windows Defender found zero threats.

Scan file or folder from Windows Security app

If you cannot find the right-click choice to scan file or folder, it can be done directly from the Windows Security app using the Custom Scan functionality. Here's how.

1. Open the Start menu by pressing the Windows key in your keyboard. Now, type "Windows Security" and press Enter. You can also click on the search result to spread out the app.

2. Within the Windows Security app, click the "Virus & threat protection" option. You can also click the sidebar tab with the same name.

3. Around the right-hand side of the page, click the "Scan Options" link. This is where you find the additional scanning options.

4. Since we want to scan a particular file or folder, choose the "Custom scan" radio option. Next, click on the "Scan now" button.

5. Now, choose the file or folder you want to scan and click on the "Select folder" button at the bottom from the window.

Defender will now scan the selected file or folder. Once completed, it will show the outcomes. Depending on the folder or file size, the scan can take some time to complete. In my case, you will find zero threats founds. When Windows Defender finds any virus or malware infection, it will show the threat signature and appropriate options to deal with it.

File Explorer on Windows 10 enables you to open any FTP site. Listed here are the steps to spread out an FTP site in File Explorer on Windows 10.

Windows File Explorer is one of the most effective tools of them all. Not only for managing local files and folders but File Explorer also allows you to connect with remote servers by mapping them as network drives. When you map the network drive, you can browse, copy, or manage remote files exactly like you would together with your local files.

Apart from manually mapping network drives, you may also open an FTP site directly in the File Explorer itself. Many of the helpful if you want to quickly browse an FTP site in File Explorer without first adding it as being a network drive. For example, you are able to configure your Android phone as an FTP server and access the Android file system via File Explorer using the FTP address.

Within this simple and quick article, I will show a simple method to open FTP site in File Explorer in Windows 10.

The steps below will work in Windows 7 and Windows 8 & Windows 8.1.

Open FTP site in File Explorer

To spread out an FTP site in the File Explorer, follow the steps shown below.

1. First, open the File Explorer application. To achieve that, press the "Windows key + E" keyboard shortcut. You may also click on the File Explorer icon on the taskbar.

2. After opening the File Explorer, click on the address bar. This is when you have to type the FTP site address.

3. Within the address bar, type the FTP site address and press "Enter". In my case, the FTP address comes with a specific port number (9999). So, I typed the FTP address and its port number.

The FTP address could be within the below formats.

ftp://domain.com/
ftp://ftp.domain.com/
ftp://192.168.0.100/
ftp://192.168.0.100:21

4. As soon as you press the Enter button on your keyboard, Windows File Explorer will open the FTP site. Do keep in mind that if the FTP site is protected having a username and password, Windows will prompt you for all those details. In that case, type the username and password and click on the "Log in" button to spread out the FTP site in File Explorer.

Important notes to keep in mind

When connecting to FTP server in File Explorer, there are some things you must always keep in mind.

The FTP connection is unencrypted by design. This means anyone within the network to determine your work and transferring to and from the FTP server.
You can only open FTP sites in File Explorer. You cannot open SFTP (SSH File Transfer Protocol) or FTPS (FTP with SSL/TLS) sites. The key reason for this is that File Explorer doesn't support encrypted FTP connections.
If you're opening the FTP site frequently, you can map FTP as network drive within the File Explorer. This removes the necessity to manually type the FTP address every time and makes your lifetime a little easier.
If you are unable to upload files to the FTP site, it could since the FTP server prohibits or doesn't give Write permission to an outside connection. This is a common security precaution for a lot of FTP servers.
Compared to third-party programs like File-Zilla, the FTP functionality in File Explorer is barebone. However, it's enough for many common tasks like accessing and copying files.
You cannot create an FTP server from File Explorer.

You are able to configure Windows 10 to auto login and boot straight to the desktop without entering the user password. Here is how you can do it.

To log right into a Windows 10 computer, you have to enter the user password every time. This can help protect your user account and files on the system from the unauthorized access. However, if you do not like entering the login password each time, you are able to skip it entirely and boot straight to the desktop. This is especially useful for single-user systems where you are the only one who uses the machine.

There's two methods to configure Windows 10 auto login. First, you can use the netplwiz tool. Second, you can use the Registry Editor to setup automatic login. Both of these methods use local and Microsoft accounts.

Without any delay, allow me to show the steps to set up auto login in Windows 10 to login without entering a person password.

Windows 10 auto login with netplwiz

Netplwiz is an advanced user account management tool. Using netplwiz, you can set up Windows 10 auto login in just a couple of steps. Here's how.

Open the Run window with the "Win + R" shortcut.
Type "netplwiz" and press Enter.
Select the user account within the "Users" tab.
Uncheck the "Users must enter a username and password to use this computer" checkbox.
Click on the "Apply" button.
Type the password twice and click "Ok"

That is it. With that, you've configured the automated login process in Windows 10.

Detailed steps:

1. Search "netplwiz" within the start menu and then click the "Run as Administrator" option. You can also make use of the Run dialog box to spread out the Advanced User Accounts applet.

2. Select your user account under "Users with this computer" and uncheck the "Users must enter a password to use this computer" checkbox.

3. Click the "Apply" button.

4. You'll be prompted to go in the user password. Type the password twice and click on the "Ok" button.

That's it. You've enabled Windows 10 auto login feature.

Disable auto login with netplwiz

To disable automatic login and let password protection for your user account, open "netplwiz", choose the user account and check the "Users must enter a username and password to make use of this computer" option. Click the "Apply" button in order to save changes and restart the computer.

I am unable to begin to see the "Users must enter a username and password to use this computer" option.

Important: If you work with Windows 10 Hello feature like the pin, picture, face detection, or fingerprint authentication, you will not see the "Users must enter a username and password to make use of this computer" option in netplwiz. Disable Windows Hello to use auto login.

Windows 10 auto login with Registry

You can use the "AutoAdminLogon" registry answer to setup automatic logon in Windows 10. Before making any changes, back up the registry.

1. Look for "regedit" within the start menu and open it.

2. Paste the below path within the address bar and press Enter.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

3. Right-click on Winlogon folder and select "New → String Value". Name the worth as "DefaultUserName". Double-click on the "DefaultUserName" value, type your username, and click on "Ok".

4. Right-click around the Winlogon folder again and select "New → String Value". Name the value as "DefaultPassword".

5. Double-click around the DefaultPassword value, go into the password within the Value Data field and click on the "Ok" button in order to save changes.

6. Right-click around the Winlogon folder and choose "New → String Value". Name the worth as "AutoAdminLogon". Double-click around the "AutoAdminLogon" value, type "1" within the Value Data field and click on "Ok".

7. Close the registry editor and restart the machine

In the future, Windows 10 won't request password and auto logins you to your desktop.

Disable auto login with registry

To disable Windows 10 auto login, go to the registry location and hang the AutoAdminLogon to "0". You can also delete the "DefaultPassword" value.

Important note: Just like the Windows 10 auto login feature is, enabling automatic login will lessen the security. It is because any user who has physical access for your system can boot to your user account with no restrictions. So, think twice before configuring auto-login.

The push for ARM is expected to achieve traction this season, and Lenovo wants to be among the first companies bringing new devices running on ARM power.

Today, laptop computer maker announced the new IdeaPad 5G, a clamshell laptop joining the company's mid-range number of products however this time with 5G capabilities.

The IdeaPad 5G is powered by the 2018 Qualcomm Snapdragon 8cx processor, so it's not exactly the latest-generation chip, although it should still be in a position to provide good performance and life of the battery anyway.

Laptops sports a 14-inch FHD display having a 90 % screen to body ratio, and also the chip is paired with 7GB RAM and 512GB SSD storage. It provides a fanless design along with a 51 WHr battery supposed to provide as much as 20 hours per charge.

"Offering as much as 20 hours of life of the battery of continuous video playback, you'll stay entertained watching videos on your sofa all day long about this 14-inch clamshell laptop with available lightning-fast 5G speeds (supports sub-6 GHz), reliable 4G LTE, plus strong Wi-Fi 55 connectivity," Lenovo explains.

Not heading to the U.S.

"This practical yet sleek device makes it easier for multitaskers to stay connected at home or on the run by combining what you love regarding your smartphone, (it even includes a SIM card holder!) like instant on responsive performance, with the efficiency of a thin and lightweight fan-less laptop with Windows 10. Where 5G is unavailable, you'll enjoy more security and dependability via 4G LTE connectivity, which will come default on the new IdeaPad 5G laptop."

In addition, the organization is also introducing a Lenovo IdeaPad 4G/LTE, which this time around comes with a Snapdragon 8c chip. This version ships with 512GB of SSD storage and 8GB of RAM.

The 5G laptop doesn't have a release date and value tag right now, but Lenovo says it won't continue sale in the usa.

Back in 2015 if this officially launched Windows 10, Microsoft also released a campaign, inviting Windows 7 and Windows 8.1 users to upgrade to the new OS version at absolutely no cost.

The only real condition was for these Windows 7 devices to be utilizing a genuine product key, with Microsoft explaining that it wanted everyone to profit from the improvements that were bundled in Windows 10 without paying.

Quite simply, beginning with mid-2016, the free upgrades were supposed to end, so whoever desired to upgrade to Windows 10 just had to spend the money for top dollar from the license.

But, upgrading from Windows 7 to Windows 10 free of charge not only was possible despite the one-year promo came to a close, it works today, as discovered recently.

Microsoft apparently hasn't changed anything concerning the way the disposable upgrades work, so if you wish to accomplish it, you just need the Media Creation Tool from Microsoft to do an in-place upgrade. It all takes a while since it needs to download the Windows 10 installation media and make preparations all files for your device, but when the process comes to an end, you ought to be running an activated copy from the new OS.

All Windows 7 computers will be able to run Windows 10, though support for some features may not be available because they require new hardware. Microsoft too says getting a new PC is the proper way to go for anyone on Windows 7.

"While you can continue using your computer running Windows 7, without continued software and security updates, it will be at and the higher chances for viruses and malware. Moving forward, the easiest way for you to stay secure is on Windows 10. And the the easy way experience Windows 10 is on the new PC. Even though it is possible to install Windows 10 on your older device, it is not recommended," the company explains.

Getting back to the disposable upgrades, just in case you're wondering how come they still work after all nowadays, it's because Microsoft itself wants you to upgrade to Windows 10. According to a business employee who considered reddit earlier, the free upgrade promo launched in 2015 was just an offer designed to push more people to Windows 10 as quickly as possible, but however, Microsoft intended from the very beginning to allow the free upgrades despite the one-year campaign came to a close.

"That whole "free" upgrade for a year was fully marketing fluff. Following the stop happened, the direction given was required a paid license HOWEVER, it was brought up by the brick and mortar stores that they were doing simple clock changes on customer devices during the upgrade challenge to obtain around it after which ultimately it was clear 2 yrs later that anything Windows 7 and up visits 10 fully activated but still even today," the claimed employee said.

"WDG didn't care pretty much whatsoever because Terry Meyerson at the time cared more about his upgrade stats than license revenue as Windows isn't Microsoft's cash cow anymore. It's the same stance back in the day where Microsoft would allow Windows Updates on pirated copies of Windows 7 as the problem ended up being to thwart security threats based from those copies."

So there you decide to go, Windows 7 is no longer supported, but you can invariably upgrade a computer to Windows 10. All at simply no extra cost.

File History can help you backup important files at regular intervals. Here's how you can enable File History in Windows 10 and set it up to backup files.

No matter who you are, it is very important that you simply backup all of your important files to a separate disk or perhaps to cloud storage. That will help you with this, Windows has a built-in feature called File History. One of the best things about File History is that it saves versions of the files. So, if you ever need to restore personal files or all of the files, it is simple to do this through the File History interface.

Within this quick guide, let me share the steps to enable the file history feature and configure it to backup your files on schedule.

Prerequisites

To make use of the File History feature, you'll need another hard disk. Because the File History is a backup tool, it won't backup files towards the internal hard drive(s) as they are not too secure when it comes to survivability in the event of any mishaps.

Steps to enable file history in Windows 10

To enable File History in Windows, stick to the steps given below.

1. First, plug-in your external hard drive. The hard drive could be in FAT32 or NTFS format.

2. After connecting the hard drive, open the Settings app. It can be done by pressing the "Windows key + I" shortcut. Next, visit the "Update & Security → Backup" page.

3. Here, click on the "Add a drive" button underneath the "Back up using File History" section.

4. Windows will scan for connected external hard drives and displays them. Select the drive in the flyout menu.

Once you select the drive, the File History feature is turned ON automatically. Automatically, Windows will back up all the user folders like desktop, downloads, pictures, videos, etc. You can also add custom folders to the backup. To do that, check the third section.

Should you open the external hard drive in File Explorer, you will see a new folder called "File History" where all the files are backed up.

Change File History frequency

Automatically, File History will auto backup the files every hour so long as the external drive is connected. As needed, you are able to change the backup frequency to satisfy your needs. For example, you can change it out from One Hour to Daily.

First, connect the external hard disk and open the Settings app. Within the Settings app, visit the "Update & Security → Backup" page. Around the right panel, click on the "More options" link.

Now, select the backup frequency of your choice in the "Backup your files" dropdown menu.

If you wish to, you can also configure how long Windows will keep the backups in the "Keep my backups" dropdown menu. In my case, I allow the defaults be. i.e, Windows will not delete any backups and I have to delete old backups manually.

Add folders to File History

In addition to the default user folders, you may also add custom folders to the backup. That way, you will not lose any important files.

First, connect the external hard disk and open the Settings app. In the Settings app, go to the "Update & Security → Backup" page. On the right panel, click the "More options" link.

Now, click on the "Add a folder" option under the "Back up these folders" section.

Choose the folder you need to backup and click on the "Choose folder" button.

The chosen folder will be instantly added to their email list of folders to backup. The next time Windows performs a backup, it'll include the new folder. If necessary, click on the "Backup now" button at the very top to trigger the backup right now.

Disable file history & take away the external drive

Should you no longer need the File History feature, you can disable it and even detach the linked hard drive. Here's how.

First, connect the external hard disk and open the Settings app. Within the Settings app, go to the "Update & Security → Backup" page. Here, turn off the "Automatically support my files" option.

If you wish to detach the drive, click the "More options" link. Next, scroll down and then click the "Stop by using this drive" button.

Restore files from File History

Should you ever have to restore files supported with File History, adopt these measures.

First, connect the external hard disk and open the Settings app. Within the Settings app, go to the "Update & Security → Backup" page. Here, click on the "More options" link around the right page.

Scroll all the way down and click on the "Restore files from the current backup" link.

Now, choose the folder or file you want to restore within the browse window and then click the "Restore" icon (saving money icon) at the bottom.

Once you click the button, Windows will restore the latest form of the files in the File History backup. With respect to the folder/file size, it can take some time to complete the procedure. After restoring the files, you are able to close the File History window and the Settings app.

Important Notes

Though the File History feature is pretty easy to use, there are a couple of things you should know.

First, the supported files are unencrypted. Which means that anyone with access to your external hard drive can see and access those supported files.

When you switch off and detach the hard drive from File History, it might not delete the backup files. So it's essential that you delete them manually, if necessary.

For automatic backup to work, you need to have the external hard disk connected to the system. When the drive isn't connected, File History cannot run the backup.

If you are not while using new Meet Now feature, you can remove it. Adopt these measures to get rid of the Meet Now icon around the taskbar on Windows 10.

Using the latest update, Microsoft silently added a new icon called "Meet Now" towards the taskbar. As possible guess from the name itself, it enables you to definitely create or join meetings with just a few clicks. Of course, the Meet Now button is only for official Microsoft services like Skype and Teams.

If you're working from home and frequently joining meetings via Skype or Teams then your new Meet Now icon is fairly handy since it gives you quick access. Not only for meetings however for personal video chats too. However, if you're not creating or joining any meeting or using the video chat functionality, the brand new 'Meet Now' icon is just unnecessary around the taskbar. Thankfully, you can easily disable the Meet Now icon and remove it from the taskbar.

In this quick guide, allow me to reveal to you the steps to remove Meet Now icon on the taskbar in Windows 10.

Steps to remove Meet Now icon around the taskbar

The brand new 'Meet Now' icon is recognized as a system icon. Being a system icon, you are able to take it off either in the taskbar settings or in the icon's context menu. I will show both methods, follow the one you like.

First, right-click around the Meet Now icon around the taskbar.
Select the "Hide" option.
The meet now icon is hidden instantly.

Disable meet now icon from taskbar settings

The Meet Now icon can also be toggled off from the taskbar settings page. Here's how.

1. First, right-click on empty space around the taskbar.

2. Choose the "Taskbar settings" option in the list.

3. Click the "Turn system icons on or off" link under the "Notification area" section.

4. Now, find the Meet Now option and turn them back.

5. Close the Settings app.

As soon as you turn off the option, the meet now icon will disappear from the taskbar's system tray.